main feature
1. Imported screw extruder or domestic bimetal screw and barrel, greatly increasing the service life;
2. Energy-saving spinning box, special for nylon 66, with cup-shaped components for easy disassembly and cleaning.
3. Specially designed single suction device and superheated steam injection system, especially suitable for PA-6 fine denier spinning requirements;
4. New type side blowing system, the wind speed is even and stable, and the tow is dry;
5. Equipped with high-quality full-automatic winding head, high switching success rate and good unwinding and tailing performance of the bottom wire.
specification
|
project |
data |
|
Final titer / hole number |
22-330D/6-144F |
|
Monofilament fineness |
1.0 -4.0D |
|
Winding speed |
highest5000 m/min |
|
Spinning method |
Slice spinning |
|
Heads per head |
8、10、12 |
|
Spinneret |
Ø75- Ø110 mm |
|
Component |
Bottom Cup |
|
Quench method |
Side blow |
|
Guide wire disk |
Ø160 mm |
|
Oiling method |
Grease the oil nozzle or tanker |
|
Winding head |
Automatic winding head | |
